L08 Electric Light Quality (WELL v2, Q2 2025)
Concept: Light · Type: Optimization · Maximum points: 3
Intent
Enhance visual comfort and minimize flicker for electric light.
Summary
This WELL feature requires projects to take into account characteristics of electric light used in the space, such as color rendering and flicker.
Issue
Humans have evolved to depend on the sun as the main and ideal source of light. Humans are tuned to the color rendering provided by daylight and recognize colors in association with daylight.1 Color can impact peoples' cognition and behavior.2 Using electric light with high color rendering can improve people's perception of a space, and low color rendering can impact the ability to differentiate between objects and perceive the surroundings accurately. Electric lighting used indoors also has low frequencies of flicker that are not present in daylight. Flicker has been associated with eye strain, headaches, migraines and epileptic seizures.3–6 In 2016, migraines accounted for 16 million disability adjusted life years (DALYs) in men and 30 million DALYs inwomen.7
Evidence
Identifying and utilizing lighting fixtures that emit a high quality of light and do not display signs of flicker contributes to a comfortable and healthy space. Light fixtures with higher color rendering emit light that shows colors realistically. The CIE General Color Rendering Index ("CRI") and measures from IES TM-30 are commonly used to communicate the color rendering properties of a light source.
Requirements
L08.1 Enhance Color Rendering Quality — 1 point
Applies to: All Spaces; excluding Circulation Areas.
All luminaires in occupiable spaces (except decorative fixtures, emergency lights and other lighting for signage) meet at least one of the following color rendering requirements. If tunable white lighting is used, the requirements are met at 1000 K intervals from the lower end (with a minimum of 2700 K) to the higher end (with a maximum of 5000 K):
CRI (Ra) ≥ 90.
CRI (Ra) ≥ 80 and R9 (R9) ≥ 50.
IES TM-30 P1 (i.e., Rf ≥ 78, IES Rg ≥ 95, -1% ≤ IES Rcs,h1 ≤ 15%).10
Verification: Technical Document (Audited)
Product specification sheets
Applies to: Circulation Areas.
All luminaires (except decorative fixtures, emergency lights and other special-purpose lighting) meet at least one of the following color rendering requirements:
CRI (Ra) ≥ 80.
P2 (i.e., IES Rf ≥ 75, IES Rg ≥ 92, -7% ≤ IES Rcs,h1 ≤ 19%).
Verification: Technical Document (Audited)
Product specification sheetsWELL Core:
Meet these requirements in non-leased spaces. To earn an additional point, also meet these requirements in leased spaces.
WELL Core projects where non-leased space represents 40% or more of total project area may pursue the additional point without achieving the feature requirements in tenant spaces. Projects utilizing this pathway should include a note on the documentation required by the feature.
L08.2 Manage Flicker — 2 points
Applies to: All Spaces.
All luminaires (except decorative lights, emergency lights and other lighting for signage) and their controls within occupiable spaces meet at least one of the following requirements:
Classified as “reduced flicker operation” per California Title 24, when tested according to the requirements in Joint Appendix JA-10.8
Recommended practices 1, 2 or 3 as defined by IEEE standard 1789-2015 LED.9
Pst LM ≤ 1.0 and SVM ≤ 0.6.
Verification: Technical Document (Audited)
Product specification sheets
WELL Core:
Meet these requirements in non-leased spaces. To earn an additional point, also meet these requirements in leased spaces.
WELL Core projects where non-leased space represents 40% or more of total project area may pursue the additional point without achieving the feature requirements in tenant spaces. Projects utilizing this pathway should include a note on the documentation required by the feature.
References
- Papamichael K, Siminovitch M, Veitch JA, Whitehead L. High Color Rendering Can Enable Better Vision without Requiring More Power. LEUKOS - J Illum Eng Soc North Am. 2016;12(1-2):27-38. doi:10.1080/15502724.2015.1004412
- Elliot AJ, Maier M. Color Psychology: Effects of Perceiving Color on Psychological Functioning in Humans. Ssrn. 2014;65(1):95-120. doi:10.1146/annurev-psych-010213-115035
- Canadian Centre for Occupational Health and Safety. Lighting Ergonomics-Light Flicker. https://www.ccohs.ca/oshanswers/ergonomics/lighting_flicker.html. Published 2015. Accessed April 4, 2018.
- Veitch JA. Modulation of Fluorescent light: flicker rate and light source effects on visual performance and visual comfort. http://web.mit.edu/parmstr/Public/NRCan/nrcc38944.pdf.
- Harding G, Wilkins AJ, Erba G, Barkley GL, Fisher RS. Photic- and pattern-induced seizures: expert consensus of the Epilepsy Foundation of America Working Group. Epilepsia. 2005;46(9):1423-1425. doi:10.1111/j.1528-1167.2005.31305.x
- Wilkings AJ, Nimmo-Smith I, Slater AI, Bedocs L. Fluorescent lighting, headaches and eyestrain. Light Res Technol. 1989;21(1):11-18.
- Institute for Health Metrics and Evaluation. GBD Compare. 2017. https://vizhub.healthdata.org/gbd-compare/.
- 2016 Building Energy Efficiency Standards. JA10.1 Introduction. California Energy Commision. https://energycodeace.com/site/custom/public/reference-ace-2016/index.html#!Documents/ja101introduction1.htm. Published 2016. Accessed February 18, 2020.
- IEEE Standards Association. IEEE Std 1789-2015 - IEEE Recommended Practices for Modulating Current in High-Brightness LEDs for Mitigating Health Risks to Viewers. 2016. doi:10.1109/IEEESTD.2015.71186
- Illuminating Engineering Society. 2024. IES TM-30-24: IES Method for Evaluating Light Source Color Rendition. https://store.ies.org/product/technical-memorandum-ies-method-for-evaluating-light-source-color-rendition/?v=0b3b97fa6688