WELL v2, Q2 2025 — this page reflects the WELL v2, Q2 2025 addenda of the WELL Building Standard.

Official source: https://v2.wellcertified.com/en/wellv2/thermal%20comfort/feature/4

T04 Individual Thermal Control (WELL v2, Q2 2025)

Concept: Thermal Comfort · Type: Optimization · Maximum points: 3

Intent

Maximize and personalize thermal comfort among all individuals.

Summary

This WELL feature requires projects to improve thermal comfort of people in the space through the provision of personal thermal comfort devices and flexible dress codes that support individual thermal preferences.

Issue

Many thermal comfort standards (such as ASHRAE 55) aim to provide a thermal environment, where at minimum 80% of people will perceive the thermal environment as acceptable.1 Due to the individualized nature of thermal comfort, not everyone will be equally comfortable under the same environmental conditions. Besides the six primary factors of thermal comfort, many secondary factors, such as age, sex, health condition, personal thermal adaptation and thermal history, including climatological origin, are considered as major secondary factors.2–5Factors, such as temperament, preferences, social and cultural norms and seasonal variation also play an important role in determining individual thermal comfort.6,7

Evidence

Adopting holistic approaches through the provision of individual thermal control devices results in improved individual thermal comfort and in the expansion of the thermal comfort acceptability limits.6,8 Individual thermal control also allows for a broader range of recommended indoor air temperatures, which is linked to energy savings potential.9–11 In larger shared spaces, use of personalized equipment is a good strategy to give people the ability to better control their sensation and comfort.12–14 For example, the use of a chair equipped with fans allows the room air temperature to increase without compromising thermal comfort.15–17 In addition, flexible dress codes are important, because clothing insulation is also one of the primary forms of intervention for addressing suboptimal thermal conditions.18

Requirements

T04.1 Provide Personal Cooling Options — 1 point

Applies to: All Spaces; excluding Dwelling Units.

The project provides all regular occupants with the ability to cool their individual environment through at least one of the following:1

Verification: On-site Photographs, Letter of Assurance – Engineer

Photographs should showcase: 
1) The mechanism occupants can use to cool themselves.

Quantity: At least four workstations per floor for 10% of all floors within the project, up to a maximum of three floors.

WELL Core:

Meet these requirements in non-leased spaces. To earn an additional point, meet these requirements in  all leased spaces.

T04.2 Provide Personal Heating Options — 1 point

Applies to: All Spaces; excluding Commercial Kitchen Spaces, Dwelling Units.

The project provides all regular occupants with the ability to warm their individual environment through at least one of the following:1

Verification: On-site Photographs, Letter of Assurance – Engineer

Photographs should showcase: 
1) The mechanism occupants can use to heat themselves.

Quantity: At least four workstations per floor for 10% of all floors within the project, up to a maximum of three floors.

WELL Core:

Meet these requirements in non-leased spaces. To earn an additional point, meet these requirements in all leased spaces.

T04.3 Allow Flexible Dress Code — 1 point

Applies to: All Spaces; excluding Commercial Kitchen Spaces, Dwelling Units.

The following requirement is met:

Verification: Policy and/or Operations Schedule

WELL Core:

Meet these requirements for direct staff.

Frequently asked questions

My project requires employees to wear uniforms; how can we accommodate the flexible dress code requirements?

Projects that require employees to wear uniforms can comply with this feature by offering different uniform options that allow employees to dress to their thermal comfort preferences such as an option to wear khaki pants or shorts / a short or long sleeve button down.

References

  1. American Society of Heating Refrigerating and Air-Conditioning Engineers. ASHRAE 55-2020: Thermal Environmental Conditions for Human Occupancy. 2021. https://www.techstreet.com/ashrae/standards/ashrae-55-2020?product_id=2207271.
  2. Ning H, Wang Z, Zhang X, Ji Y. Adaptive thermal comfort in university dormitories in the severe cold area of China. Build Environ. 2016;99:161-169. doi:10.1016/j.buildenv.2016.01.003
  3. Luo M, Ji W, Cao B, Ouyang Q, Zhu Y. Indoor climate and thermal physiological adaptation: Evidences from migrants with different cold indoor exposures. Build Environ. 2016;98:30-38. doi:10.1016/j.buildenv.2015.12.015
  4. van Hoof J, Schellen L, Soebarto V, Wong JKW, Kazak JK. Ten questions concerning thermal comfort and ageing. Build Environ. 2017;120(1):123-133. doi:10.1016/j.buildenv.2017.05.008
  5. Van Hoof J. Forty years of Fanger’s model of thermal comfort: Comfort for all? Indoor Air. 2008;18(3):182-201. doi:10.1111/j.1600-0668.2007.00516.x
  6. Nicol F, Humphreys M. Maximum temperatures in European office buildings to avoid heat discomfort. Sol Energy. 2007;81(3):295-304. doi:10.1016/j.solener.2006.07.007
  7. de Dear RJ, Brager GS. Developing an adaptive model of thermal comfort and preference. ASHRAE Trans. 1998;104(Pt 1A):145-167.
  8. Rupp RF, Vásquez NG, Lamberts R. A review of human thermal comfort in the built environment. Energy Build. 2015;105:178-205. doi:10.1016/j.enbuild.2015.07.047
  9. Zhang H, Arens E, Pasut W. Air temperature thresholds for indoor comfort and perceived air quality. Build Res Inf. 2011;39(2):134-144. doi:10.1080/09613218.2011.552703
  10. Sekhar SC. Higher space temperatures and better thermal comfort - a tropical analysis. Energy Build. 1995;23(1):63-70. doi:10.1016/0378-7788(95)00932-N
  11. Schiavon, S. & Melikov A. Energy saving and improved comfort by increased air movement. Energy Build. 2008;40(10):313-360. https://www.sciencedirect.com/science/article/pii/S0378778808001084.
  12. Pan CS, Chiang HC, Yen MC, Wang CC. Thermal comfort and energy saving of a personalized PFCU air-conditioning system. Energy Build. 2005;37(5):443-449. doi:10.1016/j.enbuild.2004.08.006
  13. Gao C, Kuklane K, Wang F, Holmér I. Personal cooling with phase change materials to improve thermal comfort from a heat wave perspective. Indoor Air. 2012;22(6):523-530. doi:10.1111/j.1600-0668.2012.00778.x
  14. Pasut W, Zhang H, Arens E, Zhai Y. Energy-efficient comfort with a heated/cooled chair: Results from human subject tests. Build Environ. 2015;84:10-21. doi:10.1016/j.buildenv.2014.10.026
  15. Watanabe S, Shimomura T, Miyazaki H. Thermal evaluation of a chair with fans as an individually controlled system. Build Environ. 2009;44(7):1392-1398. doi:10.1016/j.buildenv.2008.05.016
  16. Schiavon, S., Yang, B., Donner, Y., Chang, VW, & Nazaroff W. Thermal comfort, perceived air quality and cognitive performance when personally controlled air movement is used by tropically accllimatized persons. Indoor Air. 2016;27(3):609-702. doi:10.1111/ina.12046
  17. Zhang H, Arens E, Zhai Y. A review of the corrective power of personal comfort systems in non-neutral ambient environments. Build Environ. 2015;91:15-41. doi:10.1016/j.buildenv.2015.03.013
  18. Nicol JF, Humphreys MA. Thermal Comfort As Part of a Self-Regulating System. Build Res Pr. 1973;1(3):174-179. doi:10.1080/09613217308550237
  19. Health and Safety Executive. Thermal Comfort. https://www.hse.gov.uk/temperature/thermal/index.htm. Published 1999.