X08 Materials Optimization (WELL v2, Q2 2025)
Concept: Materials · Type: Optimization · Maximum points: 2
Intent
Promote the selection of products that have been audited to minimize impacts on human and environmental health.
Summary
This WELL feature requires screening and labeling of products in accordance with programs that audit and restrict the use of hazardous ingredient contents in materials and products.
Issue
The vast quantity and variety of chemicals flowing through the global economy makes the task of tracing possible environmental and human health impact extremely difficult. In response to growing concerns over hazardous material and product ingredients, a number of screening and certification schemes have been introduced to the market to help differentiate safer alternatives.1
Evidence
Screening and certification schemes that analyze and restrict the use of hazardous ingredients in building materials— those that are environmental contaminants and/or pose human health hazards—can mitigate exposure to potentially harmful substances, help increase the demand for these products and ultimately catalyze market transformation.2
Requirements
X08.1 Select Materials with Enhanced Chemical Restrictions — 1 point
Applies to: All Spaces.
Meet any one of the following options:
Option 1: Materials selection
For at least 25 distinct permanently installed products (including flooring, insulation, wet-applied products, ceiling and wall assemblies and systems), furniture and task and floor lamps, the following requirements are met:
Have ingredients inventoried to 100 ppm.
Meet one of the following:
- Product is free of compounds listed in the Living Building Challenge’s Red List v.4.0.3
- Product meets the chemical thresholds in the Cradle to Cradle Basic Level Restricted Substances List, version 4.4
- Product does not contain compounds listed in REACH Restriction, Authorization and SVHC lists.
- Product meets an optimization path listed under ‘Advanced Inventory & Assessment’ in Option 2 of LEED v4.1 credit ‘Building Product Disclosure and Optimization - Material Ingredients’.5
Verification: Technical Document (Audited)
Product specifications for 25 distinct applicable products installed in the project
Option 2: Future purchase of compliant products
For projects with less than 25 distinct newly and permanently installed products (including flooring, insulation, wet-applied products, ceiling and wall assemblies and systems), furniture and task and floor lamps, the following requirement is met:
Products purchased for future repair, renovation or replacement of building materials comply with chemical restrictions of Option 1 ‘Materials Selection’.
For recertification, projects must provide product specification sheets for purchases of eligible products occurring after initial certification.
Verification: Policy and/or Operations Schedule, On-going Data Report
WELL Core:
Meet these requirements for the extent of developer buildout.X08.2 Select Optimized Products — 1 point
Applies to: All Spaces.
At least 15 distinct permanently installed products (including flooring, insulation, wet-applied products, ceiling and wall assemblies and systems), furniture and task and floor lamps, are certified under one of the following programs:
Cradle to Cradle Certified™ products with a Silver, Gold or Platinum level in the Material Health category or products with a Silver, Gold or Platinum level Material Health Certificate from the Cradle to Cradle Products Innovation Institute.6
Living Product Challenge, Materials and Health & Happiness Petals or Living Product Certification, operated by the International Living Future Institute.7
Global GreenTag Product Health Declaration, with a GreenTag HealthRATE™ mark at SilverHEALTH, GoldHEALTH or PlatinumHEALTH level, operated by Global GreenTag Intl. Pty Ltd.8
Verification: Technical Document (Audited)
Product specifications for each distinct applicable product installed in the project
WELL Core:
Meet these requirements for the extent of developer buildout.Frequently asked questions
If a product specification sheet does not contain the materials named in this feature, is this enough to verify the absence of a listed ingredient?
This will meet feature requirements only if the team provides evidence that the list of products is fully inclusive and that the material is not simply omitted from the list because the list lacks sufficient detail.
If the product specification sheets do not contain sufficient detail to confirm compliance, project teams can use disclosure documentation or ecolabels. Chemical disclosure documents such as Health product declarations (HPDs) or Declare labels may be used to document absence of chemicals as they list product ingredients to a determined level or resolution (1000 or 100 ppm). In addition, many products are certified to be free of toxicants by an ecolabel. Project teams may research in the ecolabel's acceptance criteria whether their certified products are free of certain chemicals. Ecolabels usually provide a database of certified products or their products are listed in many specialized databases. Many ecolabels are part of the Global Ecolabeling Network (GEN, https://globalecolabelling.net/).
References
- Scruggs CE. Reducing hazardous chemicals in consumer products: proactive company strategies. Journal of Cleaner Production. 2013;44:105-114.
- UN Environment Programme. Global Chemicals Outlook II. From Legacies to Innovative Solutions: Implementing the 2030 Agenda for Sustainable Development. 2019.
- International Living Future Institute. The Red List. https://living-future.org/declare/declare-about/red-list/. Published 2020.
- Cradle to Cradle Products Innovation Institute. Basic Level Restricted Substances List (RSL). https://www.c2ccertified.org/resources/detail/cradle-to-cradle-certified-restricted-substances-list. Published 2020.
- U.S. Green Building Council. Building Product Disclosure and Optimization - Material Ingredients. https://www.usgbc.org/credits/new-construction-core-and-shell-schools-new-construction-retail-new-construction-healthc-189. Published 2018.
- Cradle to Cradle Products Innovation Institute. What is Cradle to Cradle Certified™? Published 2020.
- International Living Future Institute. Living Product Challenge. https://living-future.org/lpc/. Published 2020.
- Global Green Tag Intl. PTY Ltd. Product Health Declaration™ - The PHD Tool. https://www.globalgreentag.com/get-certified/product-health-declaration-the-phd-tool/. Published 2021.